Concrete Form Oil

Performance Specifications

BOSS Concrete Form Oil is formulated to impart a seperation film to all types of concrete forms. This non-staining material consists of a light mineral oil which is combined with a chemical agent to allow better than average cling tendancies to forms. The combination physically repels both water and concreteand is designed to be non-toxic and does not require a WHMIS label

              
                SPECIFIC GRAVITY @ 15.5°C                
                0.8406
              
                KINEMATIC VISCOSITY CST @ 40°C
                4.97
              
                KINEMATIC VISCOSITY CST @ 100°C
                1.75
              
                FLASH POINT, °C
                45
              
                POUR POINT, °C
                -30

APPLICATIONS

FOR APPLICATIONS TO FORMS PRIOR TO CONCRETE PLACEMENT TO FACILITATE FORM REMOVAL CONCRETE SET.
THE APPLICATOR SHOULD AVOID PUDDLES, RUNS AND EXCESSIVE SPRAY DRIFT.
CAN BE USED ON FORMS THAT HAVE BEEN PREVIOUSLY TREATED WITH FORM OIL.

IT IS READY TO USE BUT CAN BE DILUTED WITH MINERAL SPIRITS OR ALIPHATIC SOLVENTS FOR SPRAY APPLICATION CONTROL.
CAN BE STORED AND APPLIED AT BELOW FREEZING TEMPRATURES WHEN NEEDED

In order to continue to provide superior quality, BOSS LUBRICANTS reserves the right to change composition of its products without notice.

For the location of the Distributor nearest you, please call 1-800-844-9457. BOSS LUBRICANTS #112, 6303 - 30th St SE Calgary AB T2C 1R4

Print Specs

Print SDS

CONCRETE FORM OIL

Performance Specifications

APPLICATIONS

Connect with BOSS!